Heavy duty wear resistant mining tailing slurry pumps Sunlike Pump® SH Series heavy-duty slurry pump features wet parts constructed from 27% high-chrome alloy. This pump is engineered to handle highly abrasive, high-hardness, mildly corrosive, and highconcentration slurries while requiring minimal maintenance. It is widely applied in mining, coal processing, metallurgy, power plants, construction materials, and other industrial sectors. Depending on medium conditions, users can select specific material grades such as A05, A07, and A49.

Corrosion resistance mineral slurry pumps Sunlike Pump ® SHR series rubber liner slurry pumps have the features of replaceable corrosion-resistant rubber liners. They are ideal choice for conveying fine particles and corrosive slurries without sharp edge. A major advantage of the Sunlike slurry pump is multi-optional materials, such as Natural rubber, Nitrile rubber, Polyurethane etc. This enable a pump to be constructed with the most appropriate materials specifically to meet the duty requirements. These wet parts can be mixed use for better performance, lower cost and longer lifetime.

SMR Corrosion Resistant Rubber Liner Slurry Pump SMR Corrosion - Resistant Rubber Liner Slurry Pump: The SMR rubber liner slurry pump serves as an ideal solution for transporting water - solid mixture media. It is well - suited for conveying fine particles and corrosive liquids with suspended particles. The SMR series slurry pumps are characterized by replaceable wear - resistant metal liners. Depending on the medium conditions, different materials like Natural rubber, Nitrile rubber, and Polyurethane can be selected.

The SZJH slurry pump boasts outstanding performance. It has an abrasion resistance four times that of high - chrome materials. It exhibits excellent corrosion resistance, being stable in environments with a pH range of 0 to 12 and non - reactive with any acids or alkalis. Additionally, it can resist the impact of large solids effectively. Compared with metal pumps, its service life is 4 to 8 times longer. Moreover, it helps achieve energy savings and cost reduction by 20% to 40%.

Our independently developed two-stage filter feed pumps are engineered for demanding filter press applications, delivering stable high-pressure performance even at low flowrates. In laboratory conditions, the minimum flowrate reaches 20 m³/h (approx. 88 GPM), while maximum throughput can exceed 1000 m³/h (approx. 4,403 GPM). In addition, the maximum discharge pressure is above 20 bar (approx. 290 psi) — significantly higher than that of conventional single-stage pumps — enabling the formation of drier and more compact filter cakes, thus improving solid-liquid separation efficiency and operational economics.

The ZJR series horizontal filter press pumps are specifically designed for targeted industries and applications, and are available in both V-belt drive and direct-drive configurations. All Sunlike filter press pumps can be equipped with mechanical seal systems, with seal faces made of tungsten carbide or silicon carbide. Each pump is fitted with a pair of mechanical seals, which can be lubricated either by pressurized flush water or, depending on the specific model, through a closed-loop system — using natural circulation or forced circulation with a water/ethylene glycol mixture.The bearings are lubricated with either grease or oil.